The influencing factors in In impact crusher working process
The influencing factors in In impact crusher working process
Influence of impact crusher sand making equipment effect factors have three aspects: the nature of ore (ore mud content, ore density), equipment structure (groove angle, overflow weir height), method of operation (concentration, volume of ore).
One, ore properties
(1) the clay content in ore.Vertical impact crusher feeding ore mud content in the slurry viscosity, larger, then the mineral particles in slurry settling speed and smaller, overflow abortion of grain size is coarse.In order to ensure access to meet the requirements of the overflow fineness, may be appropriate with tonic water, to reduce the slurry concentration.If the ore containing less sludge, it should be increased to reduce the sand slurry concentration, return from excessive fine materials.
(2) the density of ore.In a number of parameters under the same circumstances, ore density is small, slurry viscosity is bigger, overflow product size largened; conversely, ore slurry viscosity density is bigger, smaller, overflow particle size becomes finer, sand return of fine grained content increased.So, when the impact crusher with large density should be increased properly ore, sand concentration; and broken ore density small, should be appropriate to reduce the sand concentration.
Two, equipment structure
(1) trough angle.Vertical shaft impact breaking groove angle size not only determines the sand settling area, also affect leaf on slurry stirring extent, which will influence the quality of overflow abortion.Trough angle is small, the settlement area is large, the overflow size is fine, a sand return fine content increased; conversely, trough angle increases, the settlement area decreases, coarse material down more opportunities, overflow particle size coarsening, but returned sand fine less.
(2) the overflow weir height.Adjusting the vertical impact crusher overflow weir height, can change the size of the settlement area.When the overflow weir and is high, can make the particle sedimentation area increases, sand production volume is increased, so the blade on the slurry agitation degree is relatively weak, so that the overflow particle size of thin.When the requirements of overflow coarse grain size, should reduce the overflow weir height.
In three, operation method
(1) the pulp concentration.Slurry concentration is vertical shaft impact breaking operation of the most important regulating factor.Slurry concentration is low, the overflow of fine particle size, concentration, overflow particle size coarsening.This is because of the thick pulp, pulp viscosity is bigger, settling the interference, settling speed slow, some coarse grain could sink is horizontal flow slurry out of overflow weir, the overflow particle size coarsening.However, slurry concentration is very low, there may also be a overflow size of the coarse.This is due to the concentration is too low, in order to maintain a certain production capacity, pulp volume must be great, resulting in vertical shaft impact of pulp flow velocity increases, thus the coarser particles also rushed to the overflow.So in actual production, designated for processing ore vertical shaft impact crusher, has its proper sand slurry concentration.The suitable concentration, when keep a certain business to sand size, can obtain the maximum production; and to maintain a certain productivity, can obtain the minimum separation size., this concentration is a critical concentration.
(2) volume of ore.When the pulp density, if the vertical impact broken ore feeding quantity is increased, the pulp ascending velocity and horizontal velocity is also increased, so that the overflow particle size coarsening.Conversely, feeding amount is reduced, then the overflow particle size becomes finer, the increase of the content of fine sand return.So the impact crusher broken ore feeding should be appropriate, and to maintain a uniform and stable, can make sand preparation process smoothly, obtain good sand effect.
Influence of impact crusher sand making equipment effect factors have three aspects: the nature of ore (ore mud content, ore density), equipment structure (groove angle, overflow weir height), method of operation (concentration, volume of ore).
One, ore properties
(1) the clay content in ore.Vertical impact crusher feeding ore mud content in the slurry viscosity, larger, then the mineral particles in slurry settling speed and smaller, overflow abortion of grain size is coarse.In order to ensure access to meet the requirements of the overflow fineness, may be appropriate with tonic water, to reduce the slurry concentration.If the ore containing less sludge, it should be increased to reduce the sand slurry concentration, return from excessive fine materials.
(2) the density of ore.In a number of parameters under the same circumstances, ore density is small, slurry viscosity is bigger, overflow product size largened; conversely, ore slurry viscosity density is bigger, smaller, overflow particle size becomes finer, sand return of fine grained content increased.So, when the impact crusher with large density should be increased properly ore, sand concentration; and broken ore density small, should be appropriate to reduce the sand concentration.
Two, equipment structure
(1) trough angle.Vertical shaft impact breaking groove angle size not only determines the sand settling area, also affect leaf on slurry stirring extent, which will influence the quality of overflow abortion.Trough angle is small, the settlement area is large, the overflow size is fine, a sand return fine content increased; conversely, trough angle increases, the settlement area decreases, coarse material down more opportunities, overflow particle size coarsening, but returned sand fine less.
(2) the overflow weir height.Adjusting the vertical impact crusher overflow weir height, can change the size of the settlement area.When the overflow weir and is high, can make the particle sedimentation area increases, sand production volume is increased, so the blade on the slurry agitation degree is relatively weak, so that the overflow particle size of thin.When the requirements of overflow coarse grain size, should reduce the overflow weir height.
In three, operation method
(1) the pulp concentration.Slurry concentration is vertical shaft impact breaking operation of the most important regulating factor.Slurry concentration is low, the overflow of fine particle size, concentration, overflow particle size coarsening.This is because of the thick pulp, pulp viscosity is bigger, settling the interference, settling speed slow, some coarse grain could sink is horizontal flow slurry out of overflow weir, the overflow particle size coarsening.However, slurry concentration is very low, there may also be a overflow size of the coarse.This is due to the concentration is too low, in order to maintain a certain production capacity, pulp volume must be great, resulting in vertical shaft impact of pulp flow velocity increases, thus the coarser particles also rushed to the overflow.So in actual production, designated for processing ore vertical shaft impact crusher, has its proper sand slurry concentration.The suitable concentration, when keep a certain business to sand size, can obtain the maximum production; and to maintain a certain productivity, can obtain the minimum separation size., this concentration is a critical concentration.
(2) volume of ore.When the pulp density, if the vertical impact broken ore feeding quantity is increased, the pulp ascending velocity and horizontal velocity is also increased, so that the overflow particle size coarsening.Conversely, feeding amount is reduced, then the overflow particle size becomes finer, the increase of the content of fine sand return.So the impact crusher broken ore feeding should be appropriate, and to maintain a uniform and stable, can make sand preparation process smoothly, obtain good sand effect.
PREV: Machinery Shanghai BMW exhibition booth bustling, show the effect of horizon
NEXT: Jaw crusher helps to promote high-speed development of the African Mining