Impact crusher in stone production line allocation ratio is quite high, stone and gravel processing in addition to the required particle size of the finished product, but also of the finished tablets, needle piece grain content requirements. Therefore, in the crushing plants in addition to the smash original stones with coarse crushing equipment, also need a plastic device on the gravel edges and corners, size specifications processing, impact crusher is the preferred device of this type of work.
Impact crushers working principle is applied to the rotor with the board hammer power, so that high-speed rotation, equipped with a back plate at the top of the ramp of the rotor hammer stones, gravel and back plate colliding with each other as well as fragmentation, fragmentation to a certaindegree of stones falling, high-speed rotating rotor hammering, gravel again thrown to the back plate, stones spontaneous combustion collision occurred in the process of movement and return stones, sanding, grinding poor, gravel edges to reduce a lot of out ofthe finished material was cubic elongated pebbles relative should be reduced.
The Yifan machinery impact crusher equipment can handle the side length of not more than 500mm, the compressive strength of not more than 350MPa of a variety of coarse, fine materials (granite, limestone, concrete, etc.), impact crusher in the production line is generally configured as two or threestage of broken, very suitable for processing hard and brittle materials. From the types of works and materials handling impact crusher in stone shaping device of choice.
PREV: Direction of development of the impact crusher
NEXT: YIFAN impact crusher instruction